10 Dec 2013
Ballast water treatment gets more flexible timeline
The IMO last week adopted a resolution to its ballast water management convention (BWM Convention) with a recommendation to apply a more flexible timeline. Vessels built before the entry into force date (12 months after ratification) won’t need a ballast water management system (BWMS) until their first renewal survey.
The convention’s rules, which will apply to superyachts use water ballast, are intended to prevent the spread of invasive species via the ballast tanks of international ocean-going vessels.
According to the commercial shipping intelligence website ctech, at a recent conference in Copenhagen, Panama's IMO representative indicated that the country would ratify the convention if the resolution passed. Panama’s ratification would push the BWM Convention over the edge of the 35% tonnage requirement.
New-build superyachts, because of their operational profile, tend not to take on and discharge large enough amounts of weight to require a water ballast system. However, some yachts do use seawater ballast: Yachts that have been converted from commercial vessels; sailing yachts like Perini Navi’s P2, which uses 7 tonnes of seawater ballast to improve her upwind angle, and the largest yachts, such as those built at German shipyard Lürssen. Other vessels use fresh water, which technically, is still covered under the convention.
Under the BWM Convention, the vessel’s flag administration can apply for an equivalent compliance for recreational craft with a ballast water capacity of less than 8m3 (8 tonnes).
The convention will eventually require all vessels that use water ballast to have a treatment system, plan and reporting book—and as with exhaust-gas treatment systems, the options available are not designed to fit superyacht technical spaces.
Vessels that are given the equivalence would not have to fulfill all the requirements of the convention, but they would still need to avoid spreading invasive alien species through ballast water. See all the exceptions and exemptions for regulations A-3 and A-4 in the guidelines (G3) available for download, at bottom.
For yachts with more than 8m3 of seawater ballast, or that do not qualify for equivalence or exemptions, the timeline for compliance (which in many cases implies installation of a ballast water management system, but can also be achieved by alternative means such as discharging ballast water to port reception facilities etc.) is ship specific, based on the year of construction and ballast water capacity. One possible option to avoid the burden of compliance is to engineer freshwater ballast systems that disburse yachts’ large quantity of fresh water to adjust trim and heel; though experts contacted for this article remain in debate as to whether that solution will work.
Chris van Hooren, technical and environmental director of SYBAss, agreed that this was a possible course of action. “Yachts only carry consumables and hence the amount of water ballast, if at all needed, will be small and mostly used to control trim or heel during changing consumable situations. In such cases the use of drinking water for ballast may be a much simpler solution.”
See the document (MEPC_65-2-14) addressing the use of drinking water as ballast water. The Committee submitted the document to the Review Group who reported on the subject in paragraphs 17 to 24 of the document (MEPC_65-WP.7-Rev.1.) The Committee approved the action plan as set out in paragraph 24 of that document (par. 36.5).
However, under the current rules, ‘ballast water’ is any water taken on board a vessel to trim or ballast the vessel. That would include freshwater from reverse osmosis plants aboard. There is clearly a grey area... how much shifting of fresh water between cleverly-situated tanks qualifies as ballast?
The convention has not yet been ratified and it is still possible that changes will be made. More information on this subject may be available at MEPC_66 in April next year.
Download our collection of the pertinent documents here.
photo credit: © Justin Ratcliffe 2013
Add a comment
Other Business News
After an extraordinary turn of events the Superyacht Owner’s VIP lounge returns to its traditional home. Make sure your name is on the guest list More
As concepts arrive on our desk in the run up to Monaco, we look at the line between inspiration and PR More
Thus far 2016 has seen eight serious incidents that have resulted in the loss of superyachts, nearly five more than the average numbers of yacht fires between 2010 and 2015. More
We delivered €60,000 of prizes to the crew of motoryacht Secret, the winner of The Crew Report's Superyacht Golden Ticket survey. More
Integrated Navigation Systems based on state-of-the-art technology and decades of experience in the superyacht industry. Ultimate knowledge and flexibility in system integration. Dedicated customer care throughout the whole project and beyond.
ATLAS MARINE SYSTEMS
Atlas Marine Systems, the world leader in the design of marine electrical power systems, offers a full range of engineering services necessary to define the onboard electrical distribution system or simply the application of the Atlas power conversion products.
ABB Marine and Ports
ABB is a leading supplier of electrical power and propulsion systems for ships. We provide innovative, safe and environmentally-friendly solutions and qualified services worldwide. Our AzipodÂ® propulsion has proven its efficiency and reliability on yacht vessels with its ultimate silent and ecological solution.
WREDE Consulting is an independent paint consultant and paint surveyor company who has worked for most of the 200 largest yachts worldwide in coating, paintwork and equipment areas. WREDE Consulting engages in quality management and objective quality assessment for the coating of mega- and superyachts. www.wrede-consulting.com
ASEA POWER SYSTEMS
ASEA POWER SYSTEMS is the Marine Industry Leader for Shore Power Conversion equipment ranging in power from 8kVA - 1000kVa.
Jets Vacuum AS
Jets Vacuum has for over 30 years been the leading innovator in vacuum sanitation technology. With over 11,000 Jets systems in operation on all types of ships, Jets are known for high quality, flexible cost efficient solutions backed up by first class world wide service
Marlink offers seasonal, flexible contracts to match regional sailing requirements. Through our dedicated account managers & customer services, we develop personal relationships with customers & drive innovations to develop digital solutions & smart applications that take you beyond just connectivity.
Superyacht Tenders & Toys
Superyacht Tenders & Toys have a high level of expertise in providing new build and custom tenders, chase boats, RIBs & all popular yacht toys. With an unrivalled global service network, maintaining a personal & bespoke service, wherever you are in the world, Superyacht Tenders & Toys can help.